Path: utzoo!utgpu!news-server.csri.toronto.edu!cs.utexas.edu!wuarchive!uunet!jhereg!andrew
From: andrew@jhereg.osa.com (Andrew C. Esh)
Newsgroups: comp.dcom.lans
Subject: NetPrint, Ether to LaserWriter?
Message-ID: <1991Jun5.171819.2629@jhereg.osa.com>
Date: 5 Jun 91 17:18:19 GMT
Sender: Andrew C. Esh
Organization: Open Systems Architects, Inc., Mpls, MN
Lines: 18


	I am looking for something that will allow Unix machines on an
ethernet to send Postscript to be printed by a LaserWriter. The printer
will be connected to Appletalk.

	Solutions would be a software package running on a Macintosh which
will receive TCP/IP or other standard net print traffic from Ethernet, and
spool and route it to the LaserWriter. Another solution would be a box
which essentially does the same.

	I need to try to keep the cost under $1000.

	Any ideas?
-- 
Andrew C. Esh			andrew@osa.com
Open Systems Architects, Inc.
Mpls, MN 55416-1528		Punch down, turn around, do a little crimpin'
(612) 525-0000			Punch down, turn around, plug it in and go ...