Path: utzoo!utgpu!news-server.csri.toronto.edu!cs.utexas.edu!swrinde!zaphod.mps.ohio-state.edu!think.com!linus!philabs!crpmks!wizkid!admiral!deano
From: deano@admiral.UUCP (Dean Carpenter)
Newsgroups: comp.dcom.modems
Subject: ISC 2.2.1 FAS 2.08
Message-ID: <93RZ31w164w@admiral.UUCP>
Date: 4 Jun 91 00:48:19 GMT
Sender: waffle@admiral.uucp (Waffle BBS User Login)
Reply-To: deano@admiral.UUCP (Dean Carpenter)
Organization: The Grid/Waffle BBS, 203-661-2873, -1279, -0450, -2967
Lines: 18

I'm running ISC 2.2.1 on a Hauppauge 4860 33MHz.  I recently installed
FAS 2.08 as the standard ISC asy driver couldn't handle 19200 inbound
properly (according to ISC).  But I'm still seeing the same symptoms
with FAS - that is, outbound at 19200 (via TB2500) gets about 1500 cps
but inbound gets alarms.

Watching the TX/RX leds on the tb2500 I can see that data pours into the
system for about 5 seconds, then stops. Neither led is alight.  After
about 10 seconds, the alarm occurs and another 5 second burst occurs.
Due to these 10 second pauses, the cps rate drops to around 500 or worse.
Watching the output from Uutry -x9 shows the alarms happening when :



deano@admiral.UUCP (Dean Carpenter) <uunet!areyes!admiral!deano>
The Grid/Magpie and /Waffle BBS
(HST/V32) 203-661-1279 (PEP/V32) -2873 (V32) -0450 (V29/MNP6) -2967
Multiplayer Games, Multicolor Chat, Multibbses, Multifun!