Path: utzoo!utgpu!news-server.csri.toronto.edu!bonnie.concordia.ca!uunet!zephyr.ens.tek.com!tektronix!percy!percival.rain.com!nerd
From: nerd@percival.rain.com (Michael Galassi)
Newsgroups: comp.protocols.tcp-ip.ibmpc
Subject: Re: Problem with ka9q, wd8003e, clarkson
Message-ID: <1991May31.060418.25069@percy.rain.com>
Date: 31 May 91 06:04:18 GMT
References: <1991May30.030706.12464@metro.ucc.su.OZ.AU> <9105301857.AA29500@ganges.ucop.edu>
Sender: news@percy.rain.com (news maintainer)
Organization: Percy's UNIX, Portland, OR.
Lines: 14
Nntp-Posting-Host: percival.rain.com

opschk@GANGES.UCOP.EDU writes:

>If you start packet with  WD8003E 0x60 0x3 0x280 0xd000, it means you are using
>IRQ 3 => in ka9q, you must use:
>attach packet 0x60 en0 3 1500

I don't know what version of ka9q you use, but all the ones I know of
the parameter after the interface name on the packet attach command is
the queue length and has nothing to do with the IRQ vector chosen.

-michael
-- 
Michael Galassi				| nerd@percival.rain.com
MS-DOS:  The ultimate PC virus.		| ...!tektronix!percy!nerd