Path: utzoo!utgpu!news-server.csri.toronto.edu!cs.utexas.edu!usc!rpi!think.com!paperboy!hsdndev!rutgers!bobsbox!graphics!bobl From: bobl@graphics.rent.com (Bob Lindabury - SysAdm) Newsgroups: comp.sys.amiga.datacomm Subject: Re: 9600 baud modem standards. Please assist. Message-ID: Date: 5 Jun 91 13:34:21 GMT References: <1991Jun4.232906.9797@ucselx.sdsu.edu> Organization: The Graphics BBS (2D,3D,GIF,Animation) +1 908/469-0049 Lines: 24 maxc1553@ucselx.sdsu.edu (InnerTangent - human1) writes: > Finally, I would like your personal biased opinion. My totally biased opinion is that if you want a 9600 baud modem there is only *one* standard (as standards should be) and that is V.32 and the replacement for plain V.32, V.32bis. If you purchase an HST now, you will be kicking yourself within a year because HST is going to die. PEP is ok, but I wouldn't put my money into a PEP modem with the V.32 surge. Do yourself a favor and get yourself a V.32 modem. If you really *must* have HST, then get yourself a Dual-standard (which is total balony because HST is *NOT* a standard) which will do both HST and V.32. -- Bob The Graphics BBS 908/469-0049 "It's better than a sharp stick in the eye!" ============================================================================ InterNet: bobl@graphics.rent.com | Raven Enterprises UUCP: ...rutgers!bobsbox!graphics!bobl | 25 Raven Avenue BitNet: bobl%graphics.rent.com@pucc | Piscataway, NJ 08854 Home #: 908/560-7353 | 908/271-8878