Path: utzoo!utgpu!news-server.csri.toronto.edu!cs.utexas.edu!sun-barr!apple!mips!samsung!zaphod.mps.ohio-state.edu!sol.ctr.columbia.edu!ira.uka.de!sun.rhrk.uni-kl.de!aix1.rhrk.uni-kl.de!unger
From: unger%aix1@minnehaha.rhrk.uni-kl.de
Newsgroups: comp.sys.amiga.hardware
Subject: DiPrefs Problems...
Message-ID: <1991May31.144704.27255@rhrk.uni-kl.de>
Date: 31 May 91 14:47:04 GMT
Sender: news@rhrk.uni-kl.de
Organization: none
Lines: 20
Originator: unger@aix1.rhrk.uni-kl.de

Hi, harware hackers,

i own a DeInterlace-Card from Macrosystems.
this card is very good, but the software has some problems:
when you boot under 2.0, you can't autostart the diprefs 
program or the machine will crash. i tried it in wbstartup
and startup-sequence. occasionally, the machine crashes
when i pull down the workbench screen.
does anybody have some similar experiences ? any solutions ?


   Thomas

P.S.: if you have ever used this card with 70Hz, you won't
      look at any A3000 screen again.


//////////////////////////////////////////////////////////
/ Thomas Unger unger%aix1@minnehaha.rhrk.uni-kl.de       /
//////////////////////////////////////////////////////////