Xref: utzoo comp.sys.amiga.programmer:4104 comp.sys.amiga.hardware:9709
Path: utzoo!utgpu!news-server.csri.toronto.edu!bonnie.concordia.ca!uunet!zaphod.mps.ohio-state.edu!usc!chaph.usc.edu!aludra.usc.edu!aliu
From: aliu@aludra.usc.edu (Alex C. Liu)
Newsgroups: comp.sys.amiga.programmer,comp.sys.amiga.hardware
Subject: Parnet stuff...
Keywords: IO Expansion Board, Serial device sharing...
Message-ID: <17561@chaph.usc.edu>
Date: 30 May 91 11:13:33 GMT
Sender: news@chaph.usc.edu
Followup-To: comp.sys.amiga.programmer
Organization: None to Speak of
Lines: 23
Nntp-Posting-Host: aludra.usc.edu
Originator: aliu@aludra.usc.edu

Hi,
	To the person who converted ParNet to run over the I/O
expansion board, I have a few questions:

Does it really work?  and How is the cable supposed to be connected?
I dont have the IO expansion board yet, but I need to know if parnet
will work on it, or the IO board is of no use to me.

Also, are there any programs that will let a person use the serial
port of some other computer connected through parnet?  That is if a
modem is connected in a remote amiga,would it be possible to use
parnet to use it from the local amiga?

And what is the setup for connecting several Amiga's together (more
than 2) using parnet?



-- 
_____________________________________________________________________________
Alejandro Liu           |EMail: aliu@usc.edu |All mispellings are intentional
3131 Mc Clintock #151F  |Voice: 213-745-2372 |Anything mentioned here is not
Los Angeles, CA 90007   |                    |necessarily true.