Path: utzoo!utgpu!news-server.csri.toronto.edu!rpi!usc!elroy.jpl.nasa.gov!zardoz.cpd.com!thumper!chad
From: chad@thumper.UUCP (Chad Nikoletich)
Newsgroups: comp.sys.amiga.hardware
Subject: Re: CLTD controller
Keywords: C-LTD, SCSI, ESDI Dis,k, HELP
Message-ID: <812@thumper.UUCP>
Date: 4 Jun 91 00:44:24 GMT
References: <1991May23.033646.24131@cbnewsl.att.com>
Distribution: na
Organization: Infotec Development Inc., Costa Mesa, CA
Lines: 14


In Article  <1991May23.033646.24131@cbnewsl.att.com>saify@cbnewsl.att.com (saify.lanewala) writes:
>Does anyone out there have any experiences using the CLTD SCSI
>with a LUCAS/FRANCES combo?  I'm trying to eliminate that as a
>reason.
I indeed have the above combo and working too.  I had to ground my A1000
PALs and install version 3.0 of SCSIDOS.  You can get this from Microdyn
at 316-265-2661. Microdyn has taken over the CLtd. SCSI controller line
. Two other notes about my experiences: 1) I could never get the CLtd
controller to work with a LUCAS at >16Mhz. and 2) On some drives I had
to disable the block read function in order to keep the SCSI Bus from
hanging.
Hope this helps,
Chad