Newsgroups: comp.sys.amiga.misc Path: utzoo!utgpu!news-server.csri.toronto.edu!rpi!zaphod.mps.ohio-state.edu!wuarchive!uunet!orca!javelin.sim.es.com!imp!dingebre From: dingebre@imp.sim.es.com (David Ingebretsen) Subject: Re: PS v2.1 Message-ID: <1991Jun4.001121.17563@javelin.sim.es.com> Sender: news@javelin.sim.es.com Nntp-Posting-Host: imp.sim.es.com Reply-To: dingebre@imp.sim.es.com (David Ingebretsen) Organization: Evans & Sutherland Computer Corp., Salt Lake City, UT References: <1991May27.032110.26792@mulga.cs.mu.OZ.AU> <1991May29.190426.7570@javelin.sim.es.com> Date: Tue, 4 Jun 91 00:11:21 GMT In article , wfaust@venus.UUCP (Wolf Faust) writes: > >I can't print plain text with the Canon Bubble Jet driver > >from ProWrite. Graphics print fine but plain text hangs the system? Any > >ideas Wolf? > > Well.. not exactly... I now how to fix the problem, but I don't > know what causes the problem: Prowrite or printer.device (my driver?? > doubts! ;-)?? > > Strange... using other programs for text printings work fines here > (I have no BJ printer... but CMD helps ;-) > > Well... here is a fix: get your filezaper, search and change the > command for R/L margin: > > FD1B584C52FD to FD1B584C520D > > Seems printer.device does not handle the second $FD (one second > delay) right... though, all other drivers (PlusDrivers and Commo's) > work fine with a second $fd... strange.. strange... > > And again: I'm still searching somebody with a BJ130/10e for > tests!? Rev. 8 is ready for testing since 2 months, offering a > speed increase arround 25 times while doing graphic dumps, more > resolutions... text modes... Seems BJ users have too much time ;-) > > ---- > Wolf Faust cbmvax!cbmehq!cbmger!venus!wfaust > Tel: +(49)69-5486556 FIDO: 2:243/43.5 Thanks, Wolf. I'll try tonight. If I could economically get my CanonBJ to you for testing, I would. David David Ingebretsen Evans and Sutherland Computer Corporation 600 Komas Drive Salt Lake City, UT 84108 (801) 582-5847 x3758 dingebre@es.com