Path: utzoo!utgpu!news-server.csri.toronto.edu!rpi!zaphod.mps.ohio-state.edu!wuarchive!uunet!mcsun!ub4b!kulcs!kulesat!imec!fleureck
From: fleureck@imec.be (Marc Fleureck)
Newsgroups: comp.sys.apollo
Subject: SR10.3 file system changes ?
Message-ID: <978@imec.UUCP>
Date: 4 Jun 91 12:24:00 GMT
Organization: IMEC vzw, 3030 Leuven, Belgium
Lines: 29

Hello,

Recently I copied a directory on a SR10.2 DNXXX system to
an SR10.3 HP400 system.  The directory on the SR10.2 was
about 60 M in size, but when I did a "du" on the HP400 it
gave a size of about 104 Mbytes.  

If I check with "df" on the HP400 after the copy, I can see
that about 70M has been added to the disk in stead of the expected
60M.

I suppose HP changed the block sizes of the file system ?
So the final and strange question is : how much disk space has been 
allocated ?  104M, 70M or 60M.


 _______________________________________________	       
|			    			|	
|			           _    /\	|	
| Marc Fleureck	  	          ||  __||__ 	|
| Sys Admin Unix 	          || | _||_ | 	|
| IMEC vzw		    	 _||_||_||_|| 	|
| Belgium          	        |_||_||_||_||	|
|			          ||_||_||_||_	|
| 	                           |____||_||_|	|
|			             ||    ||	|
|			    	   		| 
| E-Mail : fleureck@imec.be          IMEC vzw	|
|_______________________________________________|