Path: utzoo!utgpu!news-server.csri.toronto.edu!rpi!think.com!spool.mu.edu!uunet!ogicse!clark!pro-hindugods.cts.com!geniusman
From: geniusman@pro-hindugods.cts.com (Chris Moylan)
Newsgroups: comp.sys.apple2
Subject: Re: Apple ][ BBS Software
Message-ID: <1991Jun3.061605.19554@clark.edu>
Date: 3 Jun 91 04:22:56 GMT
Article-I.D.: clark.1991Jun3.061605.19554
Sender: usenet@clark.edu
Organization: The lazy sysop did not think we needed one.
Lines: 18


>SO, the big Q.... Can you modify ProLine without MDBASIC (and a GS)?

You bet you can!  I have done it many times on pro-hindugods, both remotely
and at the console, but it requires a renumbering program for serious
changes.  MD-BASIC is just an easier way to edit the files, and it comes with
pre-made subroutines and such, I think.  Also, many of the programs ARE
numbered by 10's , not ALL are sequential.  If you don't have MD-BASIC, get a
hold of a ProDOS renumbering program, and edit them in AppleSoft, which is
not as difficult as everyone makes it sound, especially if you make it into a
text file.  All this can be done on any Apple which can run ProDOS.

Chris

Chris Moylan                    | ProLine: geniusman@pro-hindugods 
CoSysop: Hindu Love Gods BBS    | Internet: geniusman@pro-hindugods.cts.com 
313/644-0481                    | UUCP: crash!pro-hindugods!geniusman
300-9600 bps, v.32/v.42/v.42bis | ARPA: crash!pro-hindugods!geniusman@nosc.mil