Path: utzoo!utgpu!news-server.csri.toronto.edu!rpi!usc!wuarchive!uunet!comp.vuw.ac.nz!actrix!Roger.Sheppard
From: Roger.Sheppard@actrix.gen.nz (Roger Sheppard)
Newsgroups: comp.sys.atari.st.tech
Subject: Re: lharc
Message-ID: <1991Jun01.155136.22718@actrix.gen.nz>
Date: 1 Jun 91 15:51:36 GMT
References: <6652@vela.acs.oakland.edu> <134309@unix.cis.pitt.edu>
Organization: Actrix Networks
Lines: 49

In article <134309@unix.cis.pitt.edu> rjast1@unix.cis.pitt.edu (Robert J Anisko) writes:
> In article <6652@vela.acs.oakland.edu> swood@vela.acs.oakland.edu ( EVENSONG) writes:
> >I just pulled a couple of versions of lharc off of the archive at umich,
> >but I have been having a hard time getting it to work on all files.  I 
> >keep either running into CRC errors, or I just get "no file" when I try
> >to extract an archive that I have downloaded.  I have run into this
> >with files that have been created on the systems here at OU as well as
> >from abroad.
> >
> >What is the best version of lharc, and where can I find it?  And what may
> >be causing these things to have such a hard time?
> >
> >swood
> 
>   That's happening because there is an unfortunate "double-standard"
> (forgive the pun) with LHARC - i.e. two standards exist.  My best advice
> is for you to get LHARC060 (Jon Webb & Bart Van Herk) and
> LZH11319 (Haruyashu Yoshizaki) - if one doesn't work I can about 99%
> guarantee you the other one will (I've run into the same problem
> before).  You can find both files at atari.archive.umich.edu in
> the /atari/archivers directory.  And I'd recommend getting ARCSHL25 as
> well - it lets you set up a Main and Secondary choices for the LZH (as
> well as ARC) programs - that way you could switch between them rather
> easily.
> 
>   Maybe one of these guys will come up with a version that handles
> BOTH standards (A "dual" standard program)...
>  
> 					Robert Anisko
> 					rjast1@cis.unix.pitt.edu
> 

Well you could be able to help me.
  I am unable to get Arcshl25 to work with LZH11318,
this is the latest one that I have, but the Problem is with Folders/Paths,
there is a option with arcshl25 for LZH11316,
but so far it does nothing, the arcshell still sends a 'z' parameter for
the directory option.

So far I am unable to LZH Files with Folders/Paths, with this combination
also there seems to be a limite with LZH of only 2 folders deep,
is this correct ?

Also I don't think there is a Directory/Folder Option with LHAR060. 

-- 
***  Roger W. Sheppard        *    Roger.Sheppard@bbs.actrix.gen.nz  ***
***  85 Donovan Rd          *  *   At least I don't Flicker, not     ***
***  Kapiti New Zealand..    *     like a dying light globe. !       ***