Path: utzoo!utgpu!news-server.csri.toronto.edu!rpi!think.com!sdd.hp.com!hp-pcd!hpcvra.cv.hp.com!rnews!hpcvbbs!akcs.falco
From: akcs.falco@hpcvbbs.UUCP (Andrey Dolgachev)
Newsgroups: comp.sys.handhelds
Subject: Re: hp48 RESET holes
Message-ID: <2846746b:3319.1comp.sys.handhelds;1@hpcvbbs.UUCP>
Date: 31 May 91 16:40:05 GMT
References: <42784@cup.portal.com>
Lines: 6

Regarding the placement of the Reset hole on the 48, I believe the answer
to the wuestion was posted a little while ago.  When the production of
the 48 began in Singapore, the mold was changed, with the reset hole put
on the right.  At the same time, the mold was changed for Corvaillis
also.  So, as a result, all the new 48's, regardless of where they are
manufactured now have Reset holes on the right side.
      ---Falco