Path: utzoo!utgpu!news-server.csri.toronto.edu!rpi!think.com!zaphod.mps.ohio-state.edu!casbah.acns.nwu.edu!nucsrl!tellab5!laidbak!mcdchg!ddsw1!olsa99!proxima!quagga!ucthpx!uctvax!murray
From: murray@uctvax.uct.ac.za
Newsgroups: comp.sys.ibm.pc.hardware
Subject: Help sought with WD HD controller
Message-ID: <200897.2840fb5c@uctvax.uct.ac.za>
Date: 27 May 91 10:28:12 GMT
Organization: University of Cape Town
Lines: 29

Hello:

I have a Western Digital 1:1 Interleave MFM hard/floppy controller with no
documentation. I need to put this into my machine which already has a SCSI
(Adaptec 1542 Hard/Floppy) controller. I would like to disable the floppy
controller on my WD card (I already know how to do this on the SCSI). Can
anybody help?

The controller is a WD 1006v-mm2, and it has two blocks of jumpers:

One close to the hard drive connectors marked 'W1' with 8 posts (or place
      for 4 jumpers).

And one close to the backplane/floppy controller with 6 posts(place for 3
      jumpers) marked w3, w4, w5.

Disabling the floppy drive controller would be the best, mut moving it to
a different address would also be OK as long as it didn't conflict.

Thanks in advance.

Mark.

+-----------------------+--------------------------------------------------+
|Mark RV Murray         | Domain : murray@ucthpx.uct.ac.za                 |
|Scientific Programmer, | BangPath : ..!uunet!m2xenix!quagga!ucthpx!murray |
|Physics Dept,          | CotW : I'd prefer a free bottle in front of me.  |
|University of Cape Town| +27 21 6503362 (w)      +27 21 617936 (h)        |
+-----------------------+--------------------------------------------------+