Path: utzoo!utgpu!news-server.csri.toronto.edu!rpi!think.com!bbn.com!ulowell!hawk.ulowell.edu!ychu
From: ychu@hawk.ulowell.edu (Scott Y. Chu)
Newsgroups: comp.sys.ibm.pc.hardware
Subject: Thanks and a suggestion for disk change defected!
Message-ID: <1991Jun3.074702.7299@ulowell.ulowell.edu>
Date: 3 Jun 91 07:47:02 GMT
Sender: usenet@ulowell.ulowell.edu (News manager)
Distribution: comp.periphs
Organization: University of Lowell Computer Science, Lowell MA
Lines: 13

This is to thank all of the people who response my previous Can't detect Disk
Change post. I also have a suggestion for anyone who happens to got this problem.
If you can't solve it in a short time and still want to install some software,
you may change BUFFERS parameter in CONFIG.SYS to 1 and then install the
software you want. (this keep only 1 DOS buffer available, so DOS has to reread
diretory information every time). For some software installation, it may not be
ok, e.g. Window SDK. However, most of them can be ok! Just a suggestion

-Scott Chu

P.S. I still not fix the problem with my driver. though I know how to adjust
jumper but I don't know which position is jumper 1 on my CHINCO floppy disk
driver, DOES ANY ONE KNOW CHINCO driver's jumper?