Path: utzoo!utgpu!news-server.csri.toronto.edu!rpi!zaphod.mps.ohio-state.edu!cis.ohio-state.edu!dsac.dla.mil!dsacg3.dsac.dla.mil!dsacg2.dsac.dla.mil!nfs0294
From: nfs0294@dsacg2.dsac.dla.mil (Glen Midkiff)
Newsgroups: comp.sys.ibm.pc.hardware
Subject: Re: Help sought with WD HD controller
Message-ID: <3265@dsacg2.dsac.dla.mil>
Date: 3 Jun 91 11:23:14 GMT
References: <200897.2840fb5c@uctvax.uct.ac.za$
Organization: Defense Logistics Agency Systems Automation Center, Columbus
Lines: 28

From article <200897.2840fb5c@uctvax.uct.ac.za$, by murray@uctvax.uct.ac.za:
$ Hello:
$ 
$ I have a Western Digital 1:1 Interleave MFM hard/floppy controller with no
$ documentation. I need to put this into my machine which already has a SCSI
$ (Adaptec 1542 Hard/Floppy) controller. I would like to disable the floppy
$ controller on my WD card (I already know how to do this on the SCSI). Can
$ anybody help?
$ 
$ The controller is a WD 1006v-mm2, and it has two blocks of jumpers:
$ 
$ One close to the hard drive connectors marked 'W1' with 8 posts (or place
$       for 4 jumpers).
$ 
$ And one close to the backplane/floppy controller with 6 posts(place for 3
$       jumpers) marked w3, w4, w5.
$ 
$ Disabling the floppy drive controller would be the best, mut moving it to
$ a different address would also be OK as long as it didn't conflict.
$ 
	You can download the docs file for this controller from the
	Western Digital BBS, 714-753-1234.
	 
-- 
 |-----------------------------------------------------------------------|
 |Glen Midkiff   osu-cis!dsac!gmidkiff                                   |
 |From the Internet: gmidkiff@dsac.dla.mil                               |
 |Phone: (614)-238-9643 @DLA, Systems Automation Center, Columbus, Oh.   |