Path: utzoo!utgpu!news-server.csri.toronto.edu!rutgers!gauss.rutgers.edu!math.rutgers.edu!bumby From: bumby@math.rutgers.edu (Richard Bumby) Newsgroups: comp.sys.laptops Subject: Re: kermit at 9600 baud Message-ID: Date: 1 Jun 91 23:34:24 GMT References: <1991May31.163425.13075@jade.uucp> Organization: Rutgers Univ., New Brunswick, N.J. Lines: 15 Cc: bumby I am running kermit on a T1000 connected to a Cisco box by a 9600 baud line. There is usually no difficulty with file transfer or ordinary terminal operation. Once in a while a character will be dropped when vnews displays the contents of a newsgroup. I have to be a little careful if I try to paste something assembled in the Sidekick notepad through to my host machine. One line usually goes through with no trouble, but 20 or 30 leads to a lot of beeping, although I do not recall a serious loss of data. My machine isn't particularly fast, but the serial port driver seems to be able to compensate. -- R. T. Bumby ** Rutgers Math || Amer. Math. Monthly Problems Editor bumby@math.rutgers.edu || P.O. Box 10971 New Brunswick, NJ08906-0971 Telephone: [USA] 908 828 0277 (full-time message line)