Path: utzoo!utgpu!news-server.csri.toronto.edu!cs.utexas.edu!wuarchive!zaphod.mps.ohio-state.edu!swrinde!ucsd!hub.ucsb.edu!ucsbuxa!6600zot
From: 6600zot@ucsbuxa.ucsb.edu (Jason S. White)
Newsgroups: comp.sys.mac.comm
Subject: sys 7 and telnet
Message-ID: <11747@hub.ucsb.edu>
Date: 1 Jun 91 03:09:43 GMT
Sender: news@hub.ucsb.edu
Distribution: comp
Lines: 20

I walked into work today and I found out that someone installed sys 7 on one
of the computers I work with.  The problem is that they didn't check with me,
and I didn't have a chance to prepare things.  So, things have gone to pot!

The problem that this installation caused was that the NCSA telnet 2.3 (not
the MacTCP version) does not work. The first thing I had to do was reset the
IP number.  When it went on from that I got a "initialization error: driver(E)
not installed."  Confused by this, I checked the config.tel file and every-
thing seemed fine with that file, but it still doesn't work.

Has anyone else had this problem?  Can anyone help?

-Jason S. White


--
Jason S. White         |  6600zot@ucsbuxa.ucsb.edu  |  McIntosh Jr.
Nuclear Engineering    |  jsw@sbphy.ucsb.edu        |  The power
Univ. of California    |  white@sgt-york.lanl.gov   |  to crush other
Sorta Berkeley         |  u106703@beta.lanl.gov     |  kids.  (SNL)