Xref: utzoo comp.sys.mac.comm:4027 comp.sys.mac.system:6820
Path: utzoo!utgpu!news-server.csri.toronto.edu!rpi!zaphod.mps.ohio-state.edu!wuarchive!uwm.edu!ux1.cso.uiuc.edu!resnick
From: resnick@cogsci.uiuc.edu (Pete Resnick)
Newsgroups: comp.sys.mac.comm,comp.sys.mac.system
Subject: Re: Telnet 2.x Macros
Message-ID: <1991Jun4.012130.25537@ux1.cso.uiuc.edu>
Date: 4 Jun 91 01:21:30 GMT
References: <1991Jun3.230206.25349@sequent.com>
Sender: usenet@ux1.cso.uiuc.edu (News)
Distribution: usa
Organization: University of Illinois at Urbana
Lines: 20

iceman@sequent.com (Ian Evans) writes:

>What I REALLY wanted was help with macros in Telnet.  I'm using NCSA
>Telnet 2.4b11 with MacTCP 1.0.2 under System 7.0.  The macro capability is
>quite simple, but I wanted to know if a return could be added to the
>end.  I tried ^M with no luck.  I also wanted to know if multiple
>commands could be added to a single macro.

More extensive stuff in the 2.3 manual on pp. 2.8-2.9, but:

1. CR LF in a macro is \r or \n.
2. Multiple commands should be no problem.

pr
--
Pete Resnick             (...so what is a mojo, and why would one be rising?)
Graduate assistant - Philosophy Department, Gregory Hall, UIUC
System manager - Cognitive Science Group, Beckman Institute, UIUC
Internet/ARPAnet/EDUnet  : resnick@cogsci.uiuc.edu
BITNET (if no other way) : FREE0285@UIUCVMD