Path: utzoo!utgpu!news-server.csri.toronto.edu!bonnie.concordia.ca!nstn.ns.ca!news.cs.indiana.edu!spool.mu.edu!sdd.hp.com!wuarchive!uunet!karln!karln!karln
From: karln@uunet.uu.net
Newsgroups: comp.unix.sysv386
Subject: Re: CTS/RTS problems with ISC 2.2
Summary: Get the FAS driver.
Message-ID: <1991May31.155627.25493@uunet.uu.net>
Date: 31 May 91 15:56:27 GMT
Sender: karln@uunet.uu.net
Organization: Sam76 - Pennington NJ
Lines: 31


	Thank you to all who answered my recent queries
about gettinh hardware flow control to work on the serial
port with ISC 2.2.

	The response has mostly been:

	Get the FAS Driver.

	After checking the FAQ I found out that everyone
was indeed correct :-). Didn't realize I had the FAQ.

	Niether the FAQ or the respondants told me where
I could get FAS, so

	Could anybody direct me to the lotcation of FAS.

	I can get it via internet or anybodies dialin
of course. Thanks again for your help.


		Karl Nicholas

		karln%karln@uunet.uu.net
		karln!karln@uunet.uu.net
		uunet!karln!karln
-- 
***********************************************************************
| Karl Nicholas             | A recent Gallop Poll showed that 1 in 6 |
| karln%karln@uunet.uu.net  | Americans have spoken to a dead person. |
***********************************************************************