Xref: utzoo comp.unix.xenix.sco:2700 comp.sys.ibm.pc.hardware:9323
Path: utzoo!utgpu!news-server.csri.toronto.edu!rpi!zaphod.mps.ohio-state.edu!swrinde!cs.utexas.edu!uunet!convex!usenet
From: langston@convex.COM (Kevin Langston)
Newsgroups: comp.unix.xenix.sco,comp.sys.ibm.pc.hardware
Subject: CC-832 (superceded by AST 4-port/XN) help
Keywords: Cole Weslock Master Grayhill
Message-ID: <1991Jun03.122858.26903@convex.com>
Date: 3 Jun 91 12:28:58 GMT
Sender: usenet@convex.com (news access account)
Reply-To: langston@convex.COM (Kevin Langston)
Followup-To: comp.unix.xenix.sco
Distribution: usa
Organization: Convex Computer Corporation, Technical Operations
Lines: 17
Nntp-Posting-Host: eugene.convex.com

Is the AST CC-832, an early version of the AST four port, supported by
the 2.2.3 (286) and 2.3.3 (386) versions of Xenix? The manual refers to
the 4port/XN, which I am already using under Xenix 2.3/386. The CC-832
seems to use the same D connector at the back, and is otherwise very
similar to the 4-port, except for the dip switches. They have a single
8 position dip switch, instead of the three 4/8 circuit switches of 
the 4-port.

If you have a jumper description handy, please send me a copy.

Thanks.

--
----      Kevin Langston               Convex Computer Corporation
------    WORK: langston@convex.com    Technical Operations, Functional Test
 "Supporting the Brady Bill is like looking for your lost car keys under the 
  streetlight down at the corner because that's where the light's better."