Path: utzoo!utgpu!news-server.csri.toronto.edu!rpi!zaphod.mps.ohio-state.edu!sdd.hp.com!cs.utexas.edu!ut-emx!boerner
From: boerner@ut-emx.uucp (Brendan B. Boerner)
Newsgroups: comp.windows.ms
Subject: problem printing with Adobe Type Manager on NetWare LAN
Message-ID: <49949@ut-emx.uucp>
Date: 4 Jun 91 04:13:25 GMT
Organization: UT Austin
Lines: 37

Hello,

I'm trying to use Adobe Type Manager for Windows and am having a bit
of a problem printing which perhaps someone can help me with.

My configuration is:
	Hewlett Packard Vectra QS/16S (386SX at 16Mhz)
	4MB memory
	VGA
	HP DOS v3.3
	MS Windows 3.0a
	Word for Windows 1.1a
	Novell NetWare 3.10, capturing LPT2 to an HP LaserJet III with
	5MB.

I have Windows configured to print to LPT2.OS2 rather than LPT2 since
otherwise I get many pages of garbage from the printer.

When printing using the HP built in font (CG Times), it prints
allright.

When I create a test document with "Hello world" and format it for an
ATM font at 48 point (say, Bookman), and print, it spools 2648 bytes
to the queue and the stops.  About a minute later it brings up a
dialog telling me it can't print.  Sometimes a page will come out with
about half of the top of "Hello world" printed with some garbage
overlaid.

If I configure Windows to print to LPT2:, I get the usual page after
page of garbage.

If anyone has any ideas of what I could try, I'd appreciate it.  I
have contacted Adobe once and will try again if necc. but I thought
I'd see if anyone else had this problem.

Thanks in advance,
Brendan