Path: utzoo!utgpu!news-server.csri.toronto.edu!bonnie.concordia.ca!thunder.mcrcim.mcgill.edu!snorkelwacker.mit.edu!spool.mu.edu!sol.ctr.columbia.edu!ucselx!petunia!zeus!dly
From: dly@zeus.calpoly.edu (Dixon Duong Hien Ly)
Newsgroups: comp.windows.ms
Subject: Re: Dumn Question: what is ega.sys?
Message-ID: <1991Jun5.193821.128548@zeus.calpoly.edu>
Date: 5 Jun 91 19:38:21 GMT
References: <1991Jun4.210335.20502@nntp-server.caltech.edu>
Organization: California Polytechnic University, San Luis Obispo
Lines: 39

In article <1991Jun4.210335.20502@nntp-server.caltech.edu> nyet@nntp-server.caltech.edu (n liu) writes:
>I've got a Trident 8900 card and the new hirez 256 color beta drivers.
>During installation, setup insists that i need to load ega.sys.
>
>I've experimented a little between loading it and not loading it, but
>haven't seen much difference.
>
>The startup screen looks like this:
>
>EGA Device Driver Version 2.10.18
>[copyright stuff]
>
>Using default value of BCH for interrupt 2FH function calls.
>Warning!! Overwriting an old copy of the EGA Device Driver.
>A copy of the EGA Device Driver is being installed.
>
>
>Incidentally, the "Warning!!" message goes away if i take out my Logitech
>mouse.sys ver 5.0.


Let me side track a little.  I recently downloaded the Logiteck mouse ver 5.0
from cica.  I am having a lot of trouble using it.  For example, whenever
I start up WinQvt, the mouse gets disabled.
I  have the mouse hooked up on com1 and 
I loaded the driver with:
	MOUSE 
	LOGIMENU
	CLICK
I have tried disabling logimenu and click (like I did with the older version).
Still no solution.  
I have the C9 serial with driver ver  4.something.


-- 
==============================================================================
||  Dixon D. Ly               ||   GO GIANTS !!!???                         || 
||    dly@pan.calpoly.edu     ||   Lowell once had Four Horsemen            ||
==============================================================================