Xref: utzoo rec.music.synth:21930 sci.electronics:20513
Path: utzoo!utgpu!news-server.csri.toronto.edu!rpi!think.com!zaphod.mps.ohio-state.edu!wuarchive!uunet!tymix!tardis!oliveb!amdahl!JUTS!duts!kls30
From: kls30@duts.ccc.amdahl.com (Kent L Shephard)
Newsgroups: rec.music.synth,sci.electronics
Subject: Crystals or oscilators
Summary: Need some.
Keywords: CD and DAT frequencies.
Message-ID: <0c7y02Ub08wm01@JUTS.ccc.amdahl.com>
Date: 30 May 91 17:27:02 GMT
References: <208@max.UUCP> <10870@chorus.fr>
Sender: netnews@ccc.amdahl.com
Reply-To: kls30@DUTS.ccc.amdahl.com (Kent L. Shephard)
Organization: Amdahl Corporation, Sunnyvale CA
Lines: 31

I need some crystals or oscillators that have frequencies of:

5.6448  \
11.2896  \These are in MHz and I need any one of the listed components.
22.5792  /The lower frequncies are preferred but I will take anything.
45.1584 /

6.144   \
12.288   \The same applies here as stated above.
24.576   /
49.152  /

I can use 1 from each group, lower frequency is preffered.  I can use
frequency dividers to get lower frequency if the high frequency is all
that is available.

I prefer oscillators but I can live with crystals.

Does anyone know for sure a source for thses parts in very, very small
quantities.   I know where I can have them made but I don't have $100
to spend for just 2 crystals.

BTW - I have checked just about everywhere in the Sunnyvale, Ca. area with
very little luck.

Reply via email, not everyone cares if I find crystals or not.
--
/*  -The opinions expressed are my own, not my employers.    */
/*      For I can only express my own opinions.              */
/*                                                           */
/*   Kent L. Shephard  : email - kls30@DUTS.ccc.amdahl.com   */