Path: utzoo!utgpu!news-server.csri.toronto.edu!rpi!zaphod.mps.ohio-state.edu!sdd.hp.com!spool.mu.edu!news.nd.edu!mentor.cc.purdue.edu!sage.cc.purdue.edu!asg From: asg@sage.cc.purdue.edu (The Grand Master) Newsgroups: comp.os.minix Subject: MINIX on a 486? Message-ID: <13393@mentor.cc.purdue.edu> Date: 10 Jun 91 20:23:17 GMT Article-I.D.: mentor.13393 Sender: news@mentor.cc.purdue.edu Reply-To: asg@sage.cc.purdue.edu (The Grand Master) Organization: Purdue University Lines: 44 Hello. I currently have a 286 running MINIX. Within the next 1.5 years however, I plan on upgrading to either an Amiga (running Amiga SYS5r4) or a 486. The current 486 that I am looking at is a Gateway 2000 486-33. I would get it with 40MB of memory, and two 200MB IDE drives. Now my questions: -Will the extensions to MINIX for a 386 work equally well on a 486? -Is a 15-20MB Ramdisk feasable? -Is anyone out there working on (or planning on) extensions to MINIX for a 486, or will any 486 extensions be applicable to a 386 as well. -Is anyone out there working on Job control, swapping&paging, and/or sockets for MINIX? -Is there a higher power UNIX(tm)-like OS out there with complete source that would have Job Control, swapping/paging, sockets, etc? -What are the problems associated with MINIX on IDE drives. -I have heard that there is a 32M limit on MINIX partitions. If so, 4*32=128 which would leave 72MB/drive unoccupied. Any suggestions on how to work around this? -Would I be better off getting a more high-power (and more high-priced :-( ) UNIX(tm)-like OS (propbably without the source)? Questions for my current configuration: - I have a 287 math co-processor Is there anyone out there who has done any work on getting MINIX to use the math coprocessor? - Is there a way to split my HD into > 4 partitions? If so, what files would I need to modify? thanx for your time Bruce --------- ### ## Courtesy of Bruce Varney ### # aka -> The Grand Master # asg@sage.cc.purdue.edu ### ##### # PUCC ### # ;-) # # ;'> # ##