Xref: utzoo comp.periphs:3810 comp.sys.ibm.pc.hardware:9563 comp.sys.ibm.pc.misc:10186
Path: utzoo!utgpu!news-server.csri.toronto.edu!bonnie.concordia.ca!uunet!mcsun!unido!infoac!infoac.rmi.de!siebeck
From: siebeck@infoac.rmi.de (Wolfgang Siebeck)
Newsgroups: comp.periphs,comp.sys.ibm.pc.hardware,comp.sys.ibm.pc.misc
Subject: WANTED: Jumper settings for ARCHIVE/PRIAM streamer ET60
Keywords: ARCHIVE PRIAM ET60 JUMPER_SETTINGS
Message-ID: <1991Jun10.124711.7667@infoac.rmi.de>
Date: 10 Jun 91 12:47:11 GMT
Sender: siebeck@infoac.rmi.de (Wolfgang Siebeck )
Organization: RMI Net INFO.box Systems * Aachen * Hamburg * Flensburg
Lines: 36

I got some 20 Priam tape drives, model is ET-60 and ET-60P, respectively.

Included is a adapter card, which is marked as 

ARCHIVE CORP. ASSY 80147-??? (c) 1985.

I got absolutely no documentation about this stuff and so cannot install the
tape software. (I have original disks by Priam for every drive, it says
Release TELAMON Priam P/N: 706029, EC Level 11247.

Now my problem: How do I set the I/O ports and DMA channel? The only marked
jumpers are for IRQ 2..7 :-(

Layout of the board is as follows:
                                               Bus to drive
+-------------------------------------------------------------+
|                                      +-----+ :::::::::::::: |
|                      DD +----------+ |EPROM| +------+       |
|                      .. | R6511AQ  | +-----+ |ARCH. |       |-+ D
|                      .. | R1700-17 |         |20461-|003    | | B
|                      .. +----------+         +------+       | | -
|                       Y           :::::::   IRQ     DRQ DACK| | 2
|                      CC     ::::           ::::::   ::::::  |-+ 5
+--------------------------------------------               --+
                              KHFN           |||||||||||||||
                              KHFN

Sorry about my lousy drawing, but I hope you get the idea. Does anyone know
anything about jumper settings etc.?


Thanks in advance,
Wolfgang

-- 
siebeck@infoac.rmi.de (Wolfgang Siebeck)