Path: utzoo!utgpu!news-server.csri.toronto.edu!cs.utexas.edu!wuarchive!udel!haven.umd.edu!wam.umd.edu!ignatz From: ignatz@wam.umd.edu (Mark J. Sienkiewicz) Newsgroups: comp.sys.3b1 Subject: Re: While I have the case open... Message-ID: <1991Jun9.035158.12516@wam.umd.edu> Date: 9 Jun 91 03:51:58 GMT References: <550@trux.UUCP> Sender: usenet@wam.umd.edu (USENET Posting) Organization: University of Maryland at College Park Lines: 42 Nntp-Posting-Host: avw In article <550@trux.UUCP> car@trux.UUCP (Chris Rende) writes: >I'll be opening the case of my 3b1 in the near future. > >While I've got it open, what all should I do? > When I went to take the cover off mine, i discovered that there are 3 ridges that catch when you try to lift the top off. These are on the inside of the plastic cover, just under where the keyboard sits. | <> | <>| | --------------- | fan blows out here | <- ridges on this surface | | | If you take a pocket knife and carve those ridges off, the cover will be LOTS easier to get off next time. The first time I took the cover off, I had a lot of trouble trying to 1) lift the cover with attached monitor, while also 2) trying to pry all three of these ridges away from the metal case. Scraping them away doesn't make the cover any less secure. --- If you are savvy about such things, you might want to change your floppy drive for either a 3.5" drive or a 96 tpi drive. You can then make 800K disks instead of 400K disks. I took my floppy drive out of the cabinet and installed longer cables for it. I ran the cables out through where the left fan would have been. To this day, I have a 48 tpi and a 96 tpi drive sitting next to my machine waiting for "one of these days" when they will get mounted in a real box. I swap them back and forth, using the 48tpi drive for compatibility (e.g. distribution disks, msdos files) and the 96 tpi drive for everything else. --- Have fun. Mark. ignatz@avw.umd.edu