From: davem@col.hp.com (Dave K. Martin)
Date: Fri, 7 Jun 1991 14:16:57 GMT
Subject: Re: RAM boards for 2000HD
Message-ID: <18730004@col.hp.com>
Organization: HP Colorado Springs Division
Path: utzoo!utgpu!news-server.csri.toronto.edu!rpi!zaphod.mps.ohio-state.edu!sdd.hp.com!hp-col!col!davem
Newsgroups: comp.sys.amiga.hardware
References: <55619@nigel.ee.udel.edu>

Just my $0.02 worth but I've used a Microbotics 8-up board for about 3 years 
with no problems.  It has worked well with the 68000, 68010, 68030 cpu's
I've used.  I curently use a Mega-Midget Racer and a friend uses an 8-up 
with the Commodore 68030 board and a Commodore 2-meg memory board with no 
problems.  The 8-up I've used has also worked just fine with two different
brands of hard drive controllers, the 2088 bridgeboard and everything else 
that has found a home (temporary or permanent) in my A-2000.  It has worked 
well in the 2, 4 and 6 meg configurations with most of the above also.  
 
I would assume that any correctly designed and built memory board for the Zorro bus will give you the same results.

Just a satisfied Microbotics 8-up owner..(and general Amiga fanatic ;-)
davem