From: davem@col.hp.com (Dave K. Martin) Date: Fri, 7 Jun 1991 15:07:38 GMT Subject: Re: Need Quantum Q250 Specs Message-ID: <18730007@col.hp.com> Organization: HP Colorado Springs Division Path: utzoo!utgpu!news-server.csri.toronto.edu!rpi!zaphod.mps.ohio-state.edu!sdd.hp.com!hp-col!col!davem Newsgroups: comp.sys.amiga.hardware References: <1991Jun6.203652.20963@cbnewsm.att.com> I don't know if these are useful for what you need but you might want to try these settings: QUANTUM 408-262-1100 ------------------------------------------------------------------------------ MODEL CAP CYC H RWC WPC ENC RATE ACCESS SCSI Q-250 5.25 HH 53 823 4 - - R 10 26 MS Q-280 5.25 HH 80 823 6 - - R 10 26 MS Q-160 5.25 HH 200 - 12 - - R 10 26 MS PRO40 3.5" 42 - - - - - - 19 MS PRO80 3.5" 84 - - - - - - 19 MS PRO120 3.5" 120 - - - - - - 19 MS PRO170 3.5" 168 - - - - - - 19 MS ------------------------------------------------------------------------------ -----------------------------------------------------------10/2/89----------- | CAP = CAPACITY IN FORMATTED MEGABYTES | CYC = MAXIMUM NUMBER OF CYLINDERS | H = NUMBER OF DATA HEADS | RWC = START REDUCED WRITE CURRENT | WPC = START WRITE PRECOMP | IF IT'S = CYC + 1 THEN IT IS NOT USED | ENC = ENCODING METHOD R=RLL, M=MFM | RATE = TRANSFER RATE IN MEGABITS/SEC | HH = HALF HIGH FORM FACTOR | R = RLL (run length limited) | N = NRZ (non return to zero) | M = MFM (modified frequency modulation) | SA = STAND ALONE | Z = ZBR ------------------------------------------------------------------------------ This was extracted from a list of many different hard drives and parameters that I pulled off of SCI.ELECTRONICS recently so I make no claims of accuracy or useability. If there is enough interest, I can post the entire list which covers arount 250 different drives. hope this is useful... davem