Path: utzoo!utgpu!news-server.csri.toronto.edu!rpi!zaphod.mps.ohio-state.edu!swrinde!cs.utexas.edu!helios!harpo.tamu.edu!mcl9337
From: mcl9337@harpo.tamu.edu (LOWE, MARK CHRISTOPHER)
Newsgroups: comp.sys.apple2
Subject: ProTERM ZModem downloading
Message-ID: <17015@helios.TAMU.EDU>
Date: 7 Jun 91 05:45:22 GMT
Sender: usenet@helios.TAMU.EDU
Reply-To: mcl9337@harpo.tamu.edu
Organization: Texas A&M University
Lines: 22
News-Software: VAX/VMS VNEWS 1.3-4

I am using ProTerm 2.1, which I know is probably ONE problem... but my question
is...

     Why do I start getting errors in sets of two after 100 blocks are trans-
     ferred?  The errors coincide with disk writes, but they don't start until
     after 100 blocks.  Very strange.  Anyway, my efficiency goes down as
     ZModem eventually ends up sending 128 byte blocks.  At one point, I had
     to switch to Kermit to get anything bigger than 320 blocks.  What gives?

It's probably something so ridiculously simple.  I've been out of the Apple
modem world since 1988, and many things are different now!  ACK!!

Also, I need to know if there is a decent PD or Shareware 816 assembler
available.  I grabbed a spare //e GS upgrade and now I'm looking to do
something with it!

I can ftp...

Many thanks for any help you can give me!

Mark C. "Bro!" Lowe - KB5III
aka - Sir Briggs