Path: utzoo!utgpu!news-server.csri.toronto.edu!rpi!zaphod.mps.ohio-state.edu!pacific.mps.ohio-state.edu!linac!att!ucbvax!gnh-starport.cts.com!whitewolf From: whitewolf@gnh-starport.cts.com (Tae Song) Newsgroups: comp.sys.apple2 Subject: Re: GBBS Zmodem Drivers Message-ID: Date: 10 Jun 91 08:33:15 GMT Sender: daemon@ucbvax.BERKELEY.EDU Organization: The Internet Lines: 24 |14,400 baud? I really don't know. I have a GS with a Super Serial Card that |(when using a newer modem driver) works at 19200 baud, so I suppose 14,400 |would work for something like v.32bis. The GS works at 19200 baud using the |firmware, but you have to increase the port's buffer size to keep from losing |characters when uploading. Downloading works fine... you get about 1540 cps |on a Zipped GS. | |>What I really, wanted to ask you about is [icky stuff deleted] | |Hey guy, I work for Apple. | |andy I have a bufferinit for 64K... but does the GBBS use the firmware on GS... UGH, I heard the firmware was slower than SSC's on a (1Mhz) II... that's pretty bad... About the icky stuff... I >KNOW< you work for Apple :) that's why I asked... anyways, Dave Lyons sent me a reply already... He says the AppleShare FST should work... I'm going to try it out next time I go over to he's house... INET: whitewolf@gnh-starport.cts.com UUCP: crash!gnh-starport!whitewolf ARPA: crash!gnh-starport!whitewolf@nosc.mil