Path: utzoo!utgpu!news-server.csri.toronto.edu!rpi!zaphod.mps.ohio-state.edu!swrinde!cs.utexas.edu!uunet!comp.vuw.ac.nz!actrix!Roger.Sheppard
From: Roger.Sheppard@actrix.gen.nz (Roger Sheppard)
Newsgroups: comp.sys.atari.st.tech
Subject: Re: ICD micro ST and SH205
Message-ID: <1991Jun09.104053.4720@actrix.gen.nz>
Date: 9 Jun 91 10:40:53 GMT
References: <10170@star.cs.vu.nl>
Organization: Actrix Networks
Lines: 24

In article <10170@star.cs.vu.nl> oostrom@cs.vu.nl (Vincent van Oostrom) writes:
> I have a Mega ST4 (Tos 1.4 UK) with an internal ICD micro ST host
> adapter and (brand new, empty) 80 meg seagate (1096N??) drive set to SCSI 
> device #0. Now I want to add an SH205 (with data on it in a Mega box) 
> to this configuration. The device drivers I have are the one from ICD 
> and some archaic version of atari's device driver.
> Is it possible to use these harddisks at the same time?
> What software is needed?
> 
> (I would prefer a solution in which I don't have to open my
> computer to alter the ID of the internal drive.)
> 
> Vincent van Oostrom

I don't think you will find that you can daisy chain a drive when
using the ICD micro host adapter, as this adapter has no daisy chain output.

ICD do state that the only way is with some form of parrallel connection
of Ataries acsi standard.
Iam not to sure what they ment by this..
-- 
***  Roger W. Sheppard        *    Roger.Sheppard@bbs.actrix.gen.nz  ***
***  85 Donovan Rd          *  *   At least I don't Flicker, not     ***
***  Kapiti New Zealand..    *     like a dying light globe. !       ***