Path: utzoo!utgpu!news-server.csri.toronto.edu!cs.utexas.edu!swrinde!zaphod.mps.ohio-state.edu!think.com!mintaka!bloom-beacon!eru!hagbard!sunic!chalmers.se!myab!herder From: herder@myab.se (Jan Herder) Newsgroups: comp.sys.ibm.pc.hardware Subject: Re: PS/2 floppy to std floppy i/f Message-ID: <1991Jun7.151155.6907@myab.se> Date: 7 Jun 91 15:11:55 GMT References: Organization: Fordonsdata AB Lines: 19 In article bking@ersys.edmonton.ab.ca (Barry King) writes: >Does anyone know if it's possible to connect a PS/2 style floppy >connector to a standard run of the mill floppy interface? I know that it >isn't physically possible but was wondering if, electrically speaking, >there is a corresponding mapping from the PS/2 spec to the 'standard'. The intercafe is almost the same. What IBM has done is to integrate the power in the ribbon cable. The pin 1-34 is the same. Pinout for 35-40: 35: Ground 36: Ground 37: Ground (+5 Vdc Return) 38: +5 Vdc 39: Ground (+12 Vdc Return) 40: +12 Vdc -- Jan Herder, FORDONSDATA Sweden | Phone: +46 31 18 75 12 Internet: herder@myab.se | Fax: +46 31 18 28 42 UUCP: uunet!sunic!chalmers!myab!herder | Address: Dr. Forseliusg 21 ARPA: herder%myab.se@uunet.uu.net | 413 26 Gothenburg