Xref: utzoo comp.os.msdos.desqview:255 comp.sys.ibm.pc.misc:10176
Path: utzoo!utgpu!news-server.csri.toronto.edu!rutgers!usc!elroy.jpl.nasa.gov!swrinde!mips!atha!aunro!alberta!herald.usask.ca!ccu.umanitoba.ca!umcarls9
From: umcarls9@ccu.umanitoba.ca (Charles Carlson)
Newsgroups: comp.os.msdos.desqview,comp.sys.ibm.pc.misc
Subject: Re: qemm 386 and reboot
Keywords: QEMM 5.12, DV 2.25, EMM.DVR
Message-ID: <1991Jun10.021813.5158@ccu.umanitoba.ca>
Date: 10 Jun 91 02:18:13 GMT
References: <cab3.676265618@uafhp> <1991Jun7.045022.5288@serval.net.wsu.edu> <3356@bimacs.BITNET>
Organization: University of Manitoba, Winnipeg, Canada
Lines: 22

In <3356@bimacs.BITNET> orenalex@bimacs.BITNET (oren alex) writes:

>In article <1991Jun7.045022.5288@serval.net.wsu.edu> msmith@proton.tricity.wsu.edu (Mark Smith) writes:

>>With the EMM 386 and HIMEM.SYS that came with DO$ 4.01 I couldn't do
>>a warm boot (ctrl-alt-del), the system just froze, tight.
>>
>>With Qemm My system runs like a charm.
>>

>Strange, my system freezes tight (blank screen + 2 beeps) if i warm
>boot while running QEMM.
>Tried almost everything, including telling qemm not to map the reboot
>page - no luck!

>any ideas?

I used to have various reboot troubles with QEMM.  Was always traced back
to a memory conflict.  Besure QEMM isn't using the area used by 
VGA adapters, hard drive controllers, and NICs, etc.

Charles