Path: utzoo!utgpu!news-server.csri.toronto.edu!rpi!usc!cs.utexas.edu!uunet!world!stx.UUCP!costello
From: costello@stx.UUCP (Michael E. Costello)
Newsgroups: comp.sys.mac.hardware
Subject: Re: StyleWriter stock thickness
Message-ID: <1CE00001.hgrhez@stx.UUCP>
Date: 6 Jun 91 01:48:21 GMT
Reply-To: costello%stx.UUCP@world.std.com
Organization: BCS*Mac
Lines: 17
X-Mailer: uAccess - Mac Release: 1.1.b3


In article <1991Jun5.155256.22507@dartvax.dartmouth.edu>, hitch@northstar18 (Charles Y. Hitchcock) writes:
> 
> I a trying to find out how thick the stock can be that is fed through
> through the back slot of a StyleWriter.  The information in the manual
> lists recommended paper weight, etc, but I suspect that may be for
> proper paper-feeder operation.  The straight-through paper path looks
> to be as much as 1/16" thick.  Any knowledge on this out there?
> 
There is a stock thickness selection lever which has three positions.
The thickest setting easily accomodates envelopes, and should take Bristol
board, card stock, etc.



Michael Costello, Meeting Director * costello@world.std.com * 617-625-7080
     BCS*Mac  *  The Boston Computer Society Macintosh User Group