Path: utzoo!utgpu!news-server.csri.toronto.edu!rpi!think.com!sdd.hp.com!hplabs!hpl-opus!hpcc05!hpcuhb!hpcuhe!scotta
From: scotta@hpcuhe.cup.hp.com (Scott Anderson)
Newsgroups: sci.electronics
Subject: Re: HP 6284A manual?
Message-ID: <31710003@hpcuhe.cup.hp.com>
Date: 4 Jun 91 20:41:38 GMT
References: <1991Jun2.014218.21723@athena.cs.uga.edu>
Organization: Hewlett Packard, Cupertino
Lines: 44

> Does anyone have a manual, or at least specs (% regulation, etc.)
> for an HP 6284A power supply?

From the 1991 HP Test & Measurement Catalog:

RATINGS
	DC Output		0-20 Volts
				0-3 Amperes
	Load Effect		0.01% + 4 mV
				0.01% + 250 uA
PERFORMANCE
	Source Effect		0.01% + 2 mV
				0.01% + 250 uA
	Ripple & Noise (PARD) (rms / p-p)
				200 uV / 1 mV
				2 mA rms
	Drift (stability)	0.1% + 2.5 mV
				0.1% + 7.5 mA
REMOTE CONTROL FEATURES
	Resistance Coefficient	200 Ohm/V +/- 1%
				500 Ohm/A +/- 10%
	Voltage Coeffiecient	1 V/V +/- 1%
				0.33 V/A +/- 10%
	Speed, Increasing V	No Load: 30 ms, Full Load: 80 ms
	Speed, Decreasing V	No Load: 400 ms, Full Load: 100 ms
GENERAL
	Overvoltage		Range: 2.5-23V, Margin: 4% + 2V
	Price			$1000
	Options			$132 for internal crowbar
				$0 for 230 VAC input
				$80 for resistance programming

    You can try HP Direct (1-800-538-8787) to get the manual, but they
typically need a part number.

Disclaimer: I have nothing to do with power supplies and the above
should be considered a posting of someone that happened to have an HP
catalog handy, not an HP employee.

    Scott Anderson
    An RTEsian and proud of it...		Hewlett-Packard
						Data Systems Operation
    scotta@cup.hp.com				11000 Wolfe Rd.  MS 42UN
    408-447-5219				Cupertino, CA  95014