Path: utzoo!utgpu!news-server.csri.toronto.edu!cs.utexas.edu!sdd.hp.com!spool.mu.edu!cs.umn.edu!uc!noc.MR.NET!gacvx2.gac.edu!vax1.mankato.msus.edu!tshea From: tshea@vax1.mankato.msus.edu Newsgroups: comp.os.os2.misc Subject: Message-ID: <1991Jun14.112738.618@vax1.mankato.msus.edu> Date: 14 Jun 91 17:27:38 GMT Organization: Mankato State University Lines: 18 We have a PS/2 80 hre with 10 megs of memory, two internal ESDI HD's, and a IBM 32 bit SCSI card. The machine is running SO/2 1.3 (not 1.3.1) and normmally has just a CD ROM drive hooked up to it using the IBM device drivers. I added a Maxtor 355meg SCSI drive to the change. The reference diskette had no problem with the drive. I even did a low level format. I boot up OS/2 1.3 and the SCSI driver (vers 1.0) only recongnizes the CD ROM drive. Also the second ESDI drive is gone. I go into FDISKPM and it shows two drives. The first ESDI drive (which is the boot drive) and the SCSI HD but I can't do anything to the SCSI HD. Doesn't anybody have an suggestions on what could be wrong... tim shea Intinc. 3M,cin new address --> tshea@3M.com