Path: utzoo!utgpu!news-server.csri.toronto.edu!torsqnt!tmsoft!becker!bdb From: bdb@becker.UUCP (Bruce D. Becker) Newsgroups: unix-pc.general,comp.sys.3b1 Subject: Re: WD2010 chip Message-ID: <109256@becker.UUCP> Date: 11 Jun 91 21:23:45 GMT References: Organization: G. T. S., Toronto, Ontario, Canada Lines: 20 In article harter@ficc.ferranti.com (ron harter) writes: |In order to take advantage of the wd2010 I would like to upgrade the o/s from |3.51a to 3.51m. How do I go about doing it and where do I get the diagnostic |disk needed to ormat the larger drives? You don't need the 3.51m /unix in order to use the WD2010, altho it's nice to have. You would benefit from a hardware upgrade however in order to be able to address more than 8 disk heads, and perhaps support extra drives. The revised "s4diag" is available from OSU archives - it's about 150K uncompressed... -- ,u, Bruce Becker Toronto, Ontario a /i/ Internet: bdb@becker.UUCP, bruce@gpu.utcs.toronto.edu `\o\-e UUCP: ...!utai!mnetor!becker!bdb _< /_ "Ferget yer humanity, do the poot" - devo