Path: utzoo!utgpu!news-server.csri.toronto.edu!cs.utexas.edu!sdd.hp.com!mips!pacbell.com!pacbell!well!moon!aura!sjk From: sjk@aura.nbn.com (Scott J. Kramer) Newsgroups: comp.sys.amiga.datacomm Subject: Re: JR-Comm 1.02 bugs Message-ID: Date: 13 Jun 91 23:59:58 GMT References: Reply-To: sjk@aura.nbn.com Distribution: comp Organization: sjk at home Lines: 25 In-reply-to: lord_zar@ucrmath.ucr.edu's message of 28 May 91 19:16:54 GMT In article lord_zar@ucrmath.ucr.edu (wayne wallace) writes: From: lord_zar@ucrmath.ucr.edu (wayne wallace) Newsgroups: comp.sys.amiga.datacomm Date: 28 May 91 19:16:54 GMT References: Organization: University of California, Riverside sjk@aura.nbn.com (Scott J. Kramer) writes: >* When configured as a VT-100 or VT-102 with N-color screen type > (i.e. *not* Workbench), JR-Comm's screen will flash after making > a connection. Workaround: use the WB screen type (or VLT :-)). The flash is the 'visible beep'. Go to the general menu (right amiga-8) and set the 'audible beep' Now nothing will occur if you have your monitor's sound turned down. I should have written "... will *continually* flash ...". I've just sent email to Jack about this. -- Scott J. Kramer UUCP: {sun,ucbvax}!pixar!aura!sjk P.O. Box 3392 Internet: sjk@aura.nbn.com San Rafael, CA 94912