Path: utzoo!utgpu!news-server.csri.toronto.edu!bonnie.concordia.ca!uunet!seismo!dimacs.rutgers.edu!aramis.rutgers.edu!remus.rutgers.edu!u2.rutgers.edu!andrewsr From: andrewsr@u2.rutgers.edu (Rich Andrews) Newsgroups: comp.sys.amiga.hardware Subject: Re: Super Hi-Res Message-ID: Date: 13 Jun 91 23:43:11 GMT References: <1991Jun11.223859.15615@ariel.unm.edu> <1345@cbmger.UUCP> Organization: Rutgers Univ., New Brunswick, N.J. Lines: 24 In article <1345@cbmger.UUCP> peterk@cbmger.UUCP (Peter Kittel GERMANY) writes: > In article <1991Jun11.223859.15615@ariel.unm.edu> saunders@triton.unm.edu (Richard Saunders CIRT) writes: > >across? I have a 1950, and Super Hires on it displays every other > >pixel. > > When you only get every other pixel, then you probably have the > display enhancer enabled. Check that switch on the back and set it > to Disable. > You know, the more that I read this group, the more I realize I *don't* understand this display enhancer. Why am I confused? Well, I have the switch enabled and I am using Seiko 1450. I run SuperHires Interlaced with NO flicker and it looks wonderful. What is the deal? Is it true that SuperHires *should* be flickered? Should I not be able to even see this 15Mhz graphics mode on my 31Mhz monitor? -Rich -- // Rich | "If I spent as much time on my classes as I do reading \X/ Andrews | news, I'd graduate." - Brett McCoy