Path: utzoo!utgpu!news-server.csri.toronto.edu!rpi!zaphod.mps.ohio-state.edu!caen!ox.com!math.fu-berlin.de!uniol!unido!rwthinf!cip-s08!wolfram
From: wolfram@cip-s08.informatik.rwth-aachen.de (Wolfram Roesler)
Newsgroups: comp.sys.atari.8bit
Subject: Re: 800 power supply specs
Message-ID: <wolfram.676725433@cip-s08>
Date: 12 Jun 91 11:17:13 GMT
References: <1991May28.053218.7038@news.iastate.edu> <48510006@hpcupt3.cup.hp.com> <1991May31.171715.13957@uokmax.ecn.uoknor.edu>
Sender: news@rwthinf.UUCP
Lines: 12

norlin@uokmax.ecn.uoknor.edu (Norman Lin) writes:

>I had an Atari 400 whose power supply died.  I recall being able to use
>the power supply from my 1050 drive instead (the connectors were the same,
>and as I recall the voltage specs were similar also).  I believe it was
>9 volts AC.  I don't know if this is the same as the 800, though.

I am using my Disco 2400C modem with the Atari 400 power supply. It really
is a standard connector and (I believe, too) 9 volts.

CU
\/\/olfram