Path: utzoo!utgpu!news-server.csri.toronto.edu!cs.utexas.edu!uwm.edu!ogicse!pdxgate!steele!kozowski
From: kozowski@ohsu.edu (Eric Kozowski)
Newsgroups: comp.sys.att
Subject: Re: AT&T 705 terminal pinouts?
Message-ID: <1991Jun12.192918.14199@ohsu.edu>
Date: 12 Jun 91 19:29:18 GMT
References: <607@mtndew.Tustin.CA.US>
Organization: Oregon Health Sciences University
Lines: 44

In article <607@mtndew.Tustin.CA.US> friedl@mtndew.Tustin.CA.US (Stephen J. Friedl) writes:
>Hi folks,
>
>     We have read the FM and cannot find the pinouts for the 10-pin
>modular port on the back of an AT&T 705 terminal.  Can anybody help
>out with a quick listing of what is what?
>
Sure.  They are as follows (taken from the 705 manual, pg8-8 & 8-10):

port 1: (DCE port, 10-pin RJ-45 type jack)

      PIN  (from left to right when looking at the jack)
      -------------
	1 - DSR
	2 - ?? (not listed in manual)
	3 - DCD
	4 - DTR
	5 - SG
	6 - RD
	7 - SD
	8 - CTS
	9 - RTS
	10- Protective ground

port 2: (DTE port, 25-pin D)

      PIN 
      -------------
	1 - protective ground
	2 - SD
	3 - RD
	4 - RTS
	5 - CTS
	7 - SG
	8 - DCD
	20- DTR

Hope this helps.

-- 
Eric Kozowski         
kozowski@ohsu.edu
Networks & Computing Dept.
Oregon Health Sciences University