Path: utzoo!utgpu!news-server.csri.toronto.edu!rpi!zaphod.mps.ohio-state.edu!mips!dimacs.rutgers.edu!rutgers!devon!rhutch!rdcarney
From: rdcarney@rhutch.UUCP (Randolph Carney)
Newsgroups: comp.sys.ibm.pc.hardware
Subject: VGA card help needed
Message-ID: <3XmD41w164w@rhutch.UUCP>
Date: 11 Jun 91 12:23:37 GMT
Organization: Rabbit Hutch BBS, East Earl, Pa., (717)354-5027
Lines: 16

Recently I picked up a VGA card at a hamfest CHEAP.  After installing the 
full 512K of memory, this card works perfectly up to 640x480 resolution; 
however, it won't do 800x600 using CSHOW or VGIF, which is what I was using 
to test the card.  There are six DIP switches, but the card functions 
exactly the same no matter where the switches are set.  Of course, I don't 
have any device drivers for this card.  Details: 16-bit, 512K, using Trident 
TVGA-8800CS chip set.  PC board says "ONBOARD TECHNOLOGIES ZVGA-16"; also 
there is a sticker over the top edge card connector that says "HEDAKA SUPER 
VGA".  I can use this card as it is, but I'd like to be able to exploit its 
capabilities if possible.  Any information at all greatly appreciated, 
especially a phone number where I could contact the manufacturer.

--
    UUCP: rutgers!devon!rhutch!rdcarney (Randolph Carney)
INTERNET: rhutch!rdcarney@devon.lns.pa.us
Rabbit Hutch BBS -- +1 717 354 5027