Path: utzoo!utgpu!news-server.csri.toronto.edu!rpi!zaphod.mps.ohio-state.edu!wuarchive!uunet!van-bc!troller!daver From: daver@troller.wimsey.bc.ca (Postmaster Account) Newsgroups: comp.sys.ibm.pc.hardware Subject: Daisy-chaining IDE harddrives Message-ID: Date: Thu, 13 Jun 91 13:32:34 PDT Organization: Daetech, Inc. Vancouver, B.C. You shouldn't have any problems with getting the WD and the Teac working together. It would be helpful if you included the model #'s of the drives involved, as some similar styles have different logic boards. If there is any silkscreening on the drives, try to determine where the Master and Slave jumpers on each one. With the appropriate jumpers set, (Master = C: and Slave = D:), you might be ready to go. Sometimes a manufacturer will decide that that isn't good enough, and back to square one you go. Hope that helps. daver -- daver@troller.wimsey.bc.ca (Postmaster Account) Troll's Lair BBS -- (604)294-0349