Path: utzoo!utgpu!news-server.csri.toronto.edu!cs.utexas.edu!usc!apple!news From: bell@apple.com (Mike Bell) Newsgroups: comp.sys.mac.comm Subject: Re: NCSA Telnet Suddenly Doesn't Work Message-ID: <53992@apple.Apple.COM> Date: 14 Jun 91 04:12:23 GMT References: <1991Jun14.034710.21222@wam.umd.edu> Sender: nntp@Apple.COM Reply-To: bell@apple.com (Mike Bell) Organization: Apple Computer, Inc. Lines: 66 In article <1991Jun14.034710.21222@wam.umd.edu>, mikec@wam.umd.edu (Michael D. Callaghan) writes: > Path: apple!olivea!samsung!zaphod.mps.ohio-state.edu!sample.eng.ohio- state.edu!purdue!haven.umd.edu!wam.umd.edu!mikec > From: mikec@wam.umd.edu (Michael D. Callaghan) > Newsgroups: comp.sys.mac.comm > Subject: NCSA Telnet Suddenly Doesn't Work > Keywords: telnet MacTCP NuvoTech NuvoLink Ethernet SCSI > Message-ID: <1991Jun14.034710.21222@wam.umd.edu> > Date: 14 Jun 91 03:47:10 GMT > Sender: usenet@wam.umd.edu (USENET Posting) > Organization: University of Maryland at College Park > Lines: 30 > > I am apparently the kind of person who changes everything in his system > at once, then wonders why nothing works. > > I just removed an Asante Ethernet card from SE, and replaced it with > a NuvoLink SC SCSI-->Ethernet box. The NuvoLink SC was running perfectly > on a IIcx I had sitting on my desk two days ago. I was happily telneting > and ftping to my NeXTCube, shooting files back and forth as if there > were no tomorrow. Well, it's a good thing, because tomorrow is here, > and now NCSA Telnet won't run! > > I am running MacTCP, and NCSA/BYU Telnet 2.3.4 for MacTCP. Again, this > is the same set up I had on the SE earlier with the Asante card, and > the same set up I had with the NuvoLink SC on the IIcx. > > Now, however, when I double-click on the Telnet icon, it runs, shows the > startup dialog box, then quits back to the finder. Not even a box saying > that the program unexpectedly quit. It's almost as if I run it and > immediately press Command-Q. > > Would someone tell me, please, what exactly is needed to run NCSA > Telnet properly? And what is needed to run MacTCP? And does anyone have > direct experience with the NuvoLink SC? > > Thanks! > MikeC > > -- > --------------------------------------------------------- > Michael D. Callaghan, MDC Designs, University of Maryland > --------------------------------------------------------- NCSA Telnet does this when it detects an IP address conflict. Could this be the problem ? Mike Bell ******************************************************************************** Mike Bell email: bell@apple.com MacDTS Apple Computer, Inc. 20525 Mariani Ave. Cupertino, CA 95014 ********************************************************************************