Path: utzoo!utgpu!news-server.csri.toronto.edu!bonnie.concordia.ca!thunder.mcrcim.mcgill.edu!snorkelwacker.mit.edu!usc!zaphod.mps.ohio-state.edu!wuarchive!uunet!mcsun!corton!imag!imag.fr!lafourca
From: lafourca@imag.fr
Newsgroups: comp.sys.mac.system
Subject: Re: HELP! network printing with sys 6 AND 7 ???
Message-ID: <22488@imag.imag.fr>
Date: 12 Jun 91 10:38:23 GMT
References: <1991Jun11.131841.24522@unhd.unh.edu> <31120@hydra.gatech.EDU>
Sender: news@imag.imag.fr
Reply-To: lafourca@imag.fr
Organization: GETA IMAG
Lines: 23
Nntp-Posting-Host: mac_geta-25.imag.fr

In article <31120@hydra.gatech.EDU> ccastd2@prism.gatech.EDU (Dale Phurrough)
writes:
>pas1@kepler.unh.edu (Paul A Simoneau) writes:

>I recommend upgrading your printer driver on S6 to 6.1 from 5.2 (which
>you have now).  The 6.1 versions are also available on ftp.apple.com in
>one of the directories.  I cannot remember it right now.  It is an
>additional disk that supports typetype and is initialization compat.
>with S7.  The disk is /dts/mac/sys.soft/truetype/mac-printing-tools.hqx.
>
>If you want you CAN also use 6.1 with S7, but there is no need to.

OK, but what I have to do if I want to use my printer inbackground ?

PrintMotor (version 6.1) shipped with the printing tool for LaserWriter
(version 6.1, too) is not "regognized" by the system 6.07 (french).

HEEEEEEEELP

Thanks in advance

M. Lafourcade
lafourca@imag.fr