Path: utzoo!utgpu!news-server.csri.toronto.edu!bonnie.concordia.ca!uunet!fernwood!portal!cup.portal.com!Randomizer
From: Randomizer@cup.portal.com (Aron Fingers Nelson)
Newsgroups: comp.sys.mac.system
Subject: Re: Virex 3.2 and System 7
Message-ID: <43277@cup.portal.com>
Date: 14 Jun 91 03:41:53 GMT
References: <1991Jun12.084640.5226@massey.ac.nz>
Organization: The Portal System (TM)
Lines: 15

Then a while later when I wanted to print a file on a laserwriter, no joy.
Virex 3.2 init appears to stop laserprinting on system 7.0! I didn't believe
^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^

Whenever you have a problem like this it's probably wise to call Tech
Support.  However in this case calling tech support might not be as wise
a decision. Double-click on the Virex INIT and turn OFF Diagnose files
when opened.  This will fix the problem.
Oh.. the above comment is because tech support also told me to put Virex
into the system folder and make an alias to it and put it into the extensions
folder.  Guess what, it loaded twice.  Yep, scans your disks twice etc....
Guess they never tried it under system 7 and was reading the fix on paper
or something.  Anyway ... they're usually very good and are extrememly 
pleasant.
Aron_Nelson@cup.portal.com