Path: utzoo!utgpu!news-server.csri.toronto.edu!bonnie.concordia.ca!uunet!elroy.jpl.nasa.gov!swrinde!zaphod.mps.ohio-state.edu!caen!umich!sharkey!applga!dsmith
From: dsmith@applga.aa.cad.slb.com (J. Daniel Smith)
Newsgroups: comp.text.tex
Subject: TRIP output OK??
Keywords: TRIP test
Message-ID: <1991Jun11.173250.7337@applga.aa.cad.slb.com>
Date: 11 Jun 91 17:32:50 GMT
Sender: dsmith@applga.aa.cad.slb.com (J. Daniel Smith)
Organization: Schlumberger CAD/CAM ; Ann Arbor, MI
Lines: 24

Running the TRIP test, I get several lines that are very similar; the
only difference being the elipses at the end.  The master file
contains the elipses, the generated file does not.  Is this behavior
OK?  Below is a small excerpt from the TRIP.LOG files.

If it makes any difference I'm using web2c-3.14 on HP/PA-RISC 700.

master trip.log
---------------
l.94 \openout-'78
                 terminal \openout10=tr\romannumeral1 \gobble...

generated trip.log
------------------
l.94 \openout-'78
                 terminal \openout10=tr\romannumeral1 \gobble\newcs pos

Thanks,
   Dan
-- 
===========================================================================
J. Daniel Smith                     Internet: dsmith@applga.aa.cad.slb.com
Schlumberger CAD/CAM                  BITNET: smithdan@msuegr
Ann Arbor, Michigan                   Usenet: uunet!sharkey!applga!dsmith