Path: utzoo!utgpu!news-server.csri.toronto.edu!rpi!zaphod.mps.ohio-state.edu!cis.ohio-state.edu!ucbvax!bloom-beacon!eru!hagbard!sunic!ugle.unit.no!ugle.unit.no!bernt From: bernt@kvatro.no (Bernt Marius Johnsen) Newsgroups: comp.unix.sysv386 Subject: SCO rsh error message Message-ID: Date: 12 Jun 91 09:23:28 GMT Sender: news@ugle.unit.no Distribution: comp Organization: Kvatro A/S, Trondheim, Norway Lines: 30 I do the following command on a VAX/VMS using TCP/IP software from Wollongong: > rsh durin -l chipsy (cd v12_dev; tar -xvf ../VHM.tar; rm ../VHM.tar) I get the following output from SCO 3.1.1: > tar: blocksize = 20 [... file list deleted ...] > Bad Hertz Value > Using 100 from > Bad Hertz Value > Using 100 from Everything seems to be ok, but I don't like the "Bad Hertz Value" message. Does someone know why I get this message? The same rsh command is completely ok when I change from our SCO computer (Compaq 386/20e) to a Sun386i. -- ~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~ Bernt M. Johnsen, Senior Systems Engineer KVATRO AS, Pirsenteret, N-7005 Trondheim, NORWAY E-mail: bernt@kvatro.no / Phone: +47 7 520090 / Fax: +47 7 520140 ~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~ -- ~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~ Bernt M. Johnsen, Senior Systems Engineer KVATRO AS, Pirsenteret, N-7005 Trondheim, NORWAY E-mail: bernt@kvatro.no / Phone: +47 7 520090 / Fax: +47 7 520140 ~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~