Newsgroups: comp.unix.sysv386 Path: utzoo!utgpu!news-server.csri.toronto.edu!rpi!think.com!snorkelwacker.mit.edu!ira.uka.de!fauern!forwiss.uni-passau.de!forwiss.uni-passau.de!wiese From: wiese@forwiss.uni-passau.de (Joachim Wiese) Subject: Re: MFM/RLL Disk Driver for ISC or ESIX? Message-ID: <1991Jun13.111228.6145@forwiss.uni-passau.de> Sender: usenet@forwiss.uni-passau.de (USENET News System) Nntp-Posting-Host: gandalf.forwiss.uni-passau.de Organization: University of Passau, Germany References: <1991Jun11.121605.11455@crash.cts.com> <16938@darkstar.ucsc.edu> Date: Thu, 13 Jun 91 11:12:28 GMT Lines: 30 In article , jtsillas@sprite.ma30.bull.com (James Tsillas) writes: |> I believe the Adaptec RLL controller is configurable for IRQ15. Thats right. I have an Adaptec ACB-2370 RLL controller that can be jumperd for IRQ15. But still I can't get it running as a second controller. I dont have the specifications for the Jumpers.( just of ACB-2372 ) I tried: J13 2-3 - IRQ15 J14 2-3 - bios address CC00 J13 1 - secondary io port ( I am not shure with this one ) The first controller is an Ultrastore ESDI Controller. Both controllers work fine if I set up RLL first( IRQ14,io port 1,c800) and ESDI second ( IRQ15 , io port 2 ,CC00 ); but this is not wat i nead, UNIX is on the ESDI HD and neads io-port 1 etc. If someone has the ACB-2370 description please send me the jumper settings. Or can I get ISC running on the second controller ESDI HD ? Thanks in advance. -- -------- O Joachim Wiese - \O/ --------------------------- O --------- -------- /!\ Uni. Passau---- ! wiese@forwiss.uni-passau.de /!\ --------- -------- / \ GERMANY ------- / \ --------------------------- / \ ---------