Path: utzoo!utgpu!news-server.csri.toronto.edu!rpi!zaphod.mps.ohio-state.edu!swrinde!cs.utexas.edu!rutgers!att!pacbell.com!ucsd!nosc!crash!pnet01!jca
From: jca@pnet01.cts.com (John C. Archambeau)
Newsgroups: comp.unix.sysv386
Subject: Re: MFM/RLL Disk Driver for ISC or ESIX?
Message-ID: <1991Jun15.213619.25858@crash.cts.com>
Date: 15 Jun 91 21:36:19 GMT
Sender: root@crash.cts.com
Organization: People-Net [pnet01], El Cajon CA
Lines: 22

jde@everex.uucp (-Jeff Ellis() writes:
>In article <1991Jun11.121605.11455@crash.cts.com> jca@pnet01.cts.com (John C. Archambeau) writes:
>>The driver should work as is under ESIX.  Under ISC, all you need to do is do
>>a kconfig and select the option to configure the high performance disk driver.
>>Next, rebuild the kernel, and there you have your disk driver configured for a
>>secondary controller.
>
>Well not with Esix.... the only controller that our driver supports as a
>second controller is SCSI. 

My mistake.  I was pulling from my experiences with ISC and SCO Xenix.

     // JCA

 /*
 **--------------------------------------------------------------------------*
 ** Flames  : /dev/null                     | What to buy?
 ** ARPANET : crash!pnet01!jca@nosc.mil     | EISA or MCA?
 ** INTERNET: jca@pnet01.cts.com            | When will the bus wars end?
 ** UUCP    : {nosc ucsd hplabs!hp-sdd}!crash!pnet01!jca
 **--------------------------------------------------------------------------*
 */